Simple handle for reciprocating saw blades MK2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2nd iteration of a simple printable handle that fits standard saw blades. Not a heavy duty tool! Safety edition.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 109
- Wydruki
- 0
- Wyświetlenia
- 553
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Same as the previous version MK1.
The handle consists of 2 printable parts: “HandleMainpartMK2” and
“HandlePresserMK2”.
They join together with 3 pieces M3x10 bolts + 2 standard washers and a nut for each.
See the 3rd included part named “HandleSeat”. That is a small section of
the handle intended as a test print for your printer setup. It should print a
precise cutout for the saw blade to fit in. If it doesn't, you will need to
modify the model or tweak the scale or other settings.
I measured the seat using Tactix brand saw and haven't checked the
tolerances against other manufacturers saw blades.
I intended to use ASA filament for this and the “Presser” part and gripping
end of the “Mainpart” should be printed with 100% infill. You can use
modifiers to set less infill further away from the tip.