Simple handle for reciprocating saw blades MK2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
2nd iteration of a simple printable handle that fits standard saw blades. Not a heavy duty tool! Safety edition.
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 109
- Makes
- 0
- Views
- 551
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Same as the previous version MK1.
The handle consists of 2 printable parts: “HandleMainpartMK2” and
“HandlePresserMK2”.
They join together with 3 pieces M3x10 bolts + 2 standard washers and a nut for each.
See the 3rd included part named “HandleSeat”. That is a small section of
the handle intended as a test print for your printer setup. It should print a
precise cutout for the saw blade to fit in. If it doesn't, you will need to
modify the model or tweak the scale or other settings.
I measured the seat using Tactix brand saw and haven't checked the
tolerances against other manufacturers saw blades.
I intended to use ASA filament for this and the “Presser” part and gripping
end of the “Mainpart” should be printed with 100% infill. You can use
modifiers to set less infill further away from the tip.