Cycliq 1/8th Turn Mount Twist Lock Blank
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Template model for Cycliq twist lock bike camera mount (Fly6 & Fly12)
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 293
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The first installation of a cycliq camera will require quite a bit of force, in my experience. That rounds off the edges of the lock bumps. After that, it seems to be nice & firm
I printed flat with a 0.6mm nozzle, no supports, 0.3mm layer height, and a bit of extra flow rate, in PETG-HF. It's stronger than I expected, I figured there would be layer separation issues, but none that I can tell. Works great on both my Fly6 & Fly12.
I had tried a model from vincefarq on thingiverse (https://www.thingiverse.com/thing:3069535), but it didn't work and the model was ..weird.. so I just drew one up from scratch on the same style.