Cycliq 1/8th Turn Mount Twist Lock Blank
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Template model for Cycliq twist lock bike camera mount (Fly6 & Fly12)
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 42
- Makes
- 0
- Views
- 293
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The first installation of a cycliq camera will require quite a bit of force, in my experience. That rounds off the edges of the lock bumps. After that, it seems to be nice & firm
I printed flat with a 0.6mm nozzle, no supports, 0.3mm layer height, and a bit of extra flow rate, in PETG-HF. It's stronger than I expected, I figured there would be layer separation issues, but none that I can tell. Works great on both my Fly6 & Fly12.
I had tried a model from vincefarq on thingiverse (https://www.thingiverse.com/thing:3069535), but it didn't work and the model was ..weird.. so I just drew one up from scratch on the same style.