2026 UPDATE: Bambu Lab H2D Magnetic Chute Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A chute cover for the new H2D Bambu Lab printers to guide the pooped filaments in a controlled manner.
- Ocena
- 2 / 5
- Polubienia
- 21
- Pobrania
- 184
- Wydruki
- 2
- Wyświetlenia
- 1988
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A chute cover for H2D Bambu Lab printers to guide the pooped filaments in a controlled manner. It requires 2 colours. I have uploaded the 3mf file with the settings that I sliced using Bambu Studio slicer. Please note that you can print it with only one colour is you remove the Shiny Kasi-Blad_SHOOT_60mm_logo (the BBL logo will then be hollowed out)
Overall dimensions are 154.85mm (H), 69.70mm (D) and 88.94mm wide (W).
The chute cover internal dimensions are 129.48mm (H), 67.02mm (D) and 62.14mm (W) to fit the H2D chute space. I left 0.38 mm out of the lip's height to facilitate positionning of the chute on the H2D.
It requires 4pcs of 6x3mm round magnets. The space for the magnet is very tight ON PURPOSE - The magnet holes have no tolerance and you'll need to use a 6mm drill bit (manually) to widen the holes and then force the magnet into it. No glue necessary. I recommend press-fitting them into the cover.
I used pliers...
The 2 stl should be loaded simultaneously if you're not using the 3MF
I printed the chute in Grey BBL PLA-CF and Orange eSun PLA+ (see pictures)
I remodeled it in Tinkercad to the H2D poop chute dimension and integrate the BambuLab Logo as a separate .stl