1 / 3
Magnus Bullhead 125g Quiver Adapters — zdjęcie 1
1 / 3

Magnus Bullhead 125g Quiver Adapters

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

125gr Quiver Adapters This adds the straight section and tapers up some of the edges.

Ocena
0 / 5
Polubienia
1
Pobrania
24
Wydruki
0
Wyświetlenia
114
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I didn't have any spare arrow cutoffs to use ryhno00688's design. This adds the straight section instead of gluing in an arrow shaft.

I also brought the tapered section on the top of the adapter down to allow this to sit as high as possible into my quiver.

I printed this in TPU with great success. It's quite a bit less noisy compared to hard filaments.

Tagi