Positioning Clip 8mm rods
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small clip to hold 608 bearings or spool holders in place on 8mm rods, preventing them from sliding while being moved.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 94
- Wydruki
- 2
- Wyświetlenia
- 386
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
608zz/2rs bearings tend to slide across 8mm aluminium rods a little too freely, so I created a simple little clip to to keep them in place. Also using the same clips to prevent spool holders from sliding around after having set them to the right width for a certain filament roll.
The inner diameter is set to 7,75mm for a slightly firmer grip on the rods, giving them enough friction to stay in place. With a little force they can still be moved along the rod to a different position.
STL files provided for sets of 1, 2, 4, 6 and 8 clips.
Spool holders on the photos are designed by JERRY: https://www.prusaprinters.org/prints/115984-filament-spool-holder