SCHLEPP ONE Crossbars

Printable Crossbars and Crossbar Mounts for SCHLEPP ONE Camera Cart. 

Required for mounting the SCHLEPP ONE Middle Shelf: 

1x Crossbar Long

1x Crossbar Medium

4x Crossbar Mount

Set of Screws required (included with Middle Shelf purchases):

4x M6 x 16 // 4x M6 Flat Hex Nut // 4x M8 x 16 Star Knob // 4x M8 Nut or // 4x Riveted Nut M8, Diameter 11 mm (Rivet Nut Pliers required)

We recommend using a suitable filament: ABS, PA6, PA12 or similar, ideally also reinforced (e.g., with glass fiber).

We do not assume any liability for the use of self-printed accessory parts.

Before use, we recommend conducting your own load tests. For prototypes, we have consistently used industrially printed, glass fiber-reinforced PA12. With this, we were able to operate the middle shelf with a load of 15 kg without any issues.

Please note the required build volume.

If you do not have a suitable converter, we recommend the freeware program CAD Assistant for personal use.
https://www.opencascade.com/products/cad-assistant/

With this freeware converter, you can open STEP files and automatically create a mesh by saving them, for example, as an STL file. The STL file format is supported by many slicer programs for 3D printing.

If you are not satisfied with the print results, feel free to contact us on schleppcarts.com to purchase a set of stainless steel crossbars. 

For Kickstarter backers, we offer these at a special price € 55,- incl. Mounts and Fasteners, excl. taxes, shipping and duties (outside the EU). This offer is valid until September 2025.