1 / 11
Furniture PC Fan Spacer (For CRT)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacer for fan, for fornituer, i used on my CRT monitor.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 156
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi! I made some spacers to use with my CRT for the summer. These old beasts can get warm, so a bit of airflow doesn’t hurt—but I wanted something extremely quiet.
- Spacers Size:
- 10mm
- 20mm
- 30mm
- 40mm
- 50mm
- Fans used: Noctua 200mm NF-A20 (shown in the picture)
- Power setup:
- Fans are connected directly to the motherboard
- They start automatically when the computer powers on
- Alternative setup:
- If you want to use the fans outside of a computer, I recommend a USB to PC fan adapter
- If you want to use the fans outside of a computer, I recommend a USB to PC fan adapter
- Noise reduction tip:
- I suggest using rubber feet to minimize vibration and noise
- I used 1.5 cm feet, but any similar size should work
Note: None of the links I mention are affiliate links