G2ZXL HULA feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mod allows you to mount a HULA foot (self-aligning anti-vibration foot) onto a Galileo 2 Z-Drive XL (G2ZXL).
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This mod allows you to mount a HULA foot (self-aligning anti-vibration foot) onto a Galileo 2 Z-Drive XL (G2ZXL).
v1 initial release.
It is designed for Voron users who want the vibration damping and automatic leveling benefits of HULA feet while maintaining the G2ZXL structure.
No frame modification is required — this mod is fully reversible and easy to install.
Compatibility & Contents
Compatible with: Galileo 2 Z-Drive XL (G2ZXL)
Designed for: Voron V2, Micron, and other builds using the G2ZXL
Number of printed parts: 1
Included files: 3mf
Assembly Instructions
Mounts directly under the G2ZXL assembly
No cutting, drilling, or permanent changes required
Quick installation in a few minutes
Uses standard hardware (see below)
HULA foot not included – must be printed separately (available on Printables)
Additional Hardware
Screws / Inserts:
1 × M5x16 screw (per foot)
Recommended Print Settings
Material: ABS or ASA (strongly recommended for thermal and mechanical stability)
Layer height: 0.2 mm
Infill: 40%
Supports: Not required
Orientation: Orient the parts so that layer lines follow the compression/load direction for optimal strength.
Additional Notes
Tested with a standard G2ZXL configuration
May not be compatible with heavily customized Z-drive mounts or chassis modifications
Future versions with support for other mounts or foot types are under consideration