1 / 1
UAP Toolhead
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Cpap toolhead inspired by @DK on discord using the fibersteam x carriage or my custom sheetmetal sandwich x carriage, goliath hotend, beacon rev H and bmg extruder with a smooth bearing idler. Smooth idler and front bmg bearings are MR115.
I haven't had much time to test it but it's been printing fine. Use at your own risk and have fun!
Supports are required and will need to be well tuned. I'd highly recommend a fiber filled filament to make the supports easier to remove. I've used 0.14mm top z distance, 4 interface layers and 0mm of top interface spacing with default tree supports.