OLED stand (20x20 mm aluminium profile)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand for multiple small OLEDs and a mount for 20x20 aluminium profiles (compatible with some 3Dprinters)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 141
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Looking to add an extra screen to your 3D printer?
Got some 20x20 aluminum profiles lying around for your electronics projects?
These mounts let you reuse your I2C OLED displays across multiple setups!
In my case, I’m using one on my Ender 3 S1 Plus 3D printer, and I also plan to hook it up to my Radxa Zero 3E (and if you're looking for a case for it — here you go!). I’ll be installing Klipper and setting up some fan control too.
The OLED displays I designed this for are easy to find on AliExpress for around $1–$4 (as of April 2025, ordered from Spain):
1.5" 128x128 I2C OLED display
0.96" 128x64 I2C OLED display
0.96" 128x64 I2C OLED display with 4 buttons
The mount is designed to hold all three types of displays. The covers snap into place and keep the screens secure — no glue or screws needed. You can also use the covers on their own!
They’re made to fit onto a 48×36×2 mm stand, but feel free to adapt or remix them however you like.
Feel free to remix or sell the printed models — just credit me!
If you’d like to support my work, consider buying me a coffee:
👉 https://buymeacoffee.com/nenter
I'm still new to all this, and (as you can probably tell) my resources are limited. Designing these takes a lot of time and material — especially with all the trial and error involved.
I’m finally starting to feel comfortable making models, but this one was a big challenge with all the parts that had to fit together.
Your support helps me keep learning and creating!
Thanks a lot!