1 / 1
Grimace Egg remix (smaller, hollow, no supports needed) — zdjęcie 1

Grimace Egg remix (smaller, hollow, no supports needed)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

HighPolyPrint's Grimace Egg at 58.1% (61mm ht) hollowed, cut diagonally to print w/o supports, added 6x6x2 magnet holes

Ocena
5 / 5
Polubienia
2
Pobrania
13
Wydruki
0
Wyświetlenia
82
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

My son really wanted a Grimace Egg, and HighPolyPrint's multipart Grimace Egg was great, but I wanted to create a smaller hollow version that you could place an object inside (according to some videos, the Grimace Egg has a toy iron ingot inside)

So I did a remix to hollow out the model, then resized everything to change the overall height to be ~61mm (~58.1% of original size). But I also wanted my son to be able to open and close it, so I added interior sections for magnet holes (they should fit magnets sized 6x6x2, but it turns out he didn't like it being able to open/close, so I ended up gluing it together)

Last of all, I cut it diagonally, so it could print without supports, as I was really low on purple filament, and needed as little waste as possible.

I used 20% infill, gyroid, and it seems sturdy. I also did a filament change for the last 2 layers of the eyes, to print the black pupils, and then printed the brows & mouth right after that