Grimace Egg remix (smaller, hollow, no supports needed)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
HighPolyPrint's Grimace Egg at 58.1% (61mm ht) hollowed, cut diagonally to print w/o supports, added 6x6x2 magnet holes
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 82
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Share Alike
My son really wanted a Grimace Egg, and HighPolyPrint's multipart Grimace Egg was great, but I wanted to create a smaller hollow version that you could place an object inside (according to some videos, the Grimace Egg has a toy iron ingot inside)
So I did a remix to hollow out the model, then resized everything to change the overall height to be ~61mm (~58.1% of original size). But I also wanted my son to be able to open and close it, so I added interior sections for magnet holes (they should fit magnets sized 6x6x2, but it turns out he didn't like it being able to open/close, so I ended up gluing it together)
Last of all, I cut it diagonally, so it could print without supports, as I was really low on purple filament, and needed as little waste as possible.
I used 20% infill, gyroid, and it seems sturdy. I also did a filament change for the last 2 layers of the eyes, to print the black pupils, and then printed the brows & mouth right after that
