1 / 1
General Controller Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Design Concept
This General Controller Holder is designed to securely hold remote controllers. Its minimalist and sleek design fits well into any modern setup.
Purpose
The holder is perfect for organizing and protecting your controllers, keeping them in an easily accessible location.
Printing Suggestions
- Use PLA or PETG with around 20% infill for a good balance of sturdiness and filament usage.
- Layer height of 0.2mm is recommended for smooth surfaces.
Assembly Instructions
Ensure the holder is mounted securely using screws and anchors that fit the mounting holes provided. Test with the intended controller to ensure a snug fit.