98 modeli
DESIGN INTENTS Replacing thumbsticks that are damaged on PS4 controllers Design for 3D printing (and not a blind replica of the original) Overhangs and bridges have been adjusted to work on any calibrated 3D printer Stick is a little bit…
This is a stand for Ps4, Ps5, Xbox,etc, controlers.
i didn't try too print the smaller PS5 Dualsense Controller smaller_closer so it maybe dos not work
Stand or Wallmounted Ständer oder Wandhalter
cool print it is all ready on the side so you don't need to use support
These are based on upperpeninsulaplastics's Ultimate Retropie Joystick Controller . Thanks for providing a .step file! These are the changes to my design: Tabbed holes that work for snap-in buttons All other buttons to front Moved…
English Simple mount for dual shock or PS4 controllers to put under your gaming desk, or your coffe table. It uses its joysticks as a holding points. Used to hold one controler at a time. To be hones Iam not sure if this may damage the…
Box for bike controller, for bike frame with a diameter of 32 mm. 155x80x65
Living with children is hard not only for fathers, but also for material things.... After surviving a few drops to the floor, the battery cover on my TV remote broke. I could not leave the remote with the batteries exposed while my…
This housing is made for a PWM controller 12V 2.0A (max), sold here: www.banggood.com/Low-Voltage-DC-1_8V-3V-5V-6V-12V-2A-Motor-Speed-Controller-PWM-1803B-p-961010.html Attachment using 2 screws or double sided tape. Assembly…
This is a simple design to hold those common IR RGB LED remote controlers. Print settings that I used just for reference: Material: ABS Layer Height: 0.25mm Printer: Voron Trident
Mount for the helialux Spectrum and Smartcontroler 4 screws were used for mounting it to the wall size: 3,5 x 19 mm
Design Features: Universal Ergonomic Fit: The curves of the tentacle and suction cups are meticulously shaped to securely hold modern controllers without slipping or scratching. Balanced & Heavy-Base: Engineered with a wide, low center of…
I needed a case for the controller and I think more people will need it too
protect cover for hörmann remote controler for gates or doors. It can be use as a protect cover or when is original housing broken. Cover are made from two pieces, which are connected with two srew DIN 912 M2x8. This size of cover is for…
Please show me your prints and share how you like the model.
L:30mm x W:65mm L:25mm x W:65mm L:20mm x W:50mm 2022/11/9 updated 2022/11/14 updated adjust the join method. It is easier to combine.
FR Toutes les pièces imprimées en 3D pour vous construire un contrôleur paramétrable et disposant de très nombreuses fonctions. Des fichiers VCarve et graphiques sont aussi proposés pour réaliser la découpe des façades de ce contrôleur…
no supports needed you do need infill
A simple phone holder for DJI fpv and avata Works with Parrot Disco phone holder. No screw, insert in place and hold it with the necklace. Fits perfectly, the antenna is still free to rotate. Printed without support (on the side) Stop…
I created this box to house the somfy controler that was created by Evgeni and described in:https://www.die-welt.net/2021/06/controlling-somfy-roller-shutters-using-an-esp32-and-esphome/
Ps 5 Controlerholder only for Elegoo Neptun 4
Snap-on Holder for Razor Quick Charging Stand for PS5 Controler Fits on 19x19 mm support beam
Simple Assemble case 21 CM WIDE
I made this Holder for my Led strips, Is printed in TPU wich make it so easy to put it on the holder just by pushing a little with just one hand. I did not try it in PLA only in TPU wich gave me a fantastic result. I glue it to the…
Holder For Controlers
Knobs for Lionel power controler My favoite source of Model train things https://railgoose.com/ Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2 Infill: 30% Filament: MatterHackers PLA…
Mini drone frame, fits any regular flight controler!
I didnt like the original clamp mount so I designed new better one. Just unscrew the camp and put it on this. The holder on photo is for 10 inch tablet Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…
Ich brauchte eine Möglichkeit meine Pistolenregler an der Carrerabahn ordentlich aufzubewahren. Also schnell einen Halter konstruiert und beschriftet. Fahrer-ID 1-6 oder eine Blankoversion ohne Beschriftung findet ihr hier. Verschraubar…
Držáček na zeď pro dálkový ovladač světel
Standard Prusa settings for PLA, 0,4, Height 0,2… it can be more.
A stand for the controller using the design of the USB dongle as inspiration.
Small custom HID device. Case for your Arduino Micro (leonardo) project! https://store.arduino.cc/arduino-micro https://www.gearbest.com/other-accessories/pp\_218569.html?wid=1527929…
This design was inspired in the original Voron 1.5 enclosure and in Dasaki 1.4 ramps enclosure (see link) The aim was to provide good air circulation even with fan fail and a wide open lid for facilitating maintenance. There are several…
Nice headset and PS5 controller mount for under-desk or any other location. I added an 8mm square hole for the charging cable to remain connected while storing. Additionally, I flattened two sides to make it easier to print with supports.…
Remove the wall plate around the light switch and install this one. Dimensions for: Triplex 60 in. LED Brushed Nickel Ceiling Fan with Light and Remote Control Great ceiling fan btw. I uploaded the Fusion360 files if you want to remix it…
Remote control holder for LED lighting. LED solar lamp. Remote control dimensions: 40x86x6.5 mm
box for pc light controler (esp8266 that controls case lights + power on + audio trigger) see here for pcb, code and instructions : https://github.com/Rayn2k18/pc_light_controler
This is holder for controller on PS4. You can even charge your controller in the box.
Enclosure for the LVDS controller board A.VST29.01B. Did not use the buttons that come with the board. Made holes just for the IR receiver so i can use the remote i got with it. I also got a wider version that i made for some speakers i…
For HW/SW see Github https://github.com/JanZChlumu/Kids-Semaphore Designed by Yan Print instructions Cover could be printed with symbol of different color.
I wanted a grip that i could attach or detach using magnets, so i made one! it uses 6 magnets ( 10x4 -radius x height) it's the 20mm variant, so check your tube ;)
ღილაკების ყუთი დისტანციური გადამცემისთვის დამატებული აკუმლიატორით და დამტენით Box for remote control with extra battery, charger and buttons tp4056
This is my V1.0 version for the BB-8 remote controler Print instructions Category: R/C Vehicles Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 15 Filament: 123-3D PLA
i needed a new holder for my controler, but unfortunly i couldnt find one that fits on printables (i searched like 1 minute) and then i designt one for my self 20% infill tree support when laydown its not so smooth, but its a print time…
Easy holder/mount for PWM controller, eliminates the problem of connector feet bumping into the table and reduces the chances of short circuits. Normal version: Uses small poles to hold PCB, works very well and is my more liked version.…
Holder for remote controler (OSRAM light) hook on cot (23mm)
I've designed a stand / Chassis for my wireless heating controller. Usually it is mounted on the wall, but I wanted to be able to move it around the hose. Printed in PLA, with organic supports.
I used this on mye Aprilia Tuareg 660 but i might work on other bikes also. You will need 2x M4 bolts with nuts.
Replacement for original metal mount (that does not prevent the remote from turning while mounted). Screw holes has the same pattern as original. Use whatever filament you like.
this will mount your fisher plow control box using double side tape, also it is in 2 parts so it can be removed when not in use… the joints are very tight and solid… test fit and sand if needed… i just used a de-burring tool… i printed in…
these are a simple alternative for the uncomfortable original thumbsticks for the hubsan line of controllers. It saved not laying flat so you will have to make sure its sitting flat to print.. Category: R/C Vehicles
This is my first model feel free to recreate :)
these LEDs were just lying around so I built them into my enclosure. I did not want the remote control lying around, so I had to make a mount. Thats the result
FR: Supports pour le récepteur FS-BS6 et l'ESC Surpass Hobby 80A, pour le 3RONCO de Casadio. Il faudra démonter le système de ventilation d'origine pour que l'ESC passe, néanmoins il faudra faire attention à la chauffe du boîtier ESC.…
this model is a 1:1 model of the xmotion sumo controler
The stand has three different height settings and it is very portable. I meant to publish this model for the DJ contest but I didn't know how so please if you see this could you count me in as a competitor.
This remote control holder is based on an older model. Avide has slightly modified the geometry. It no longer fits the older model. Here you can see which model fits your remote controller. I made two versions, one can be glued to the…
draw your ps controller quickly and easily
the blue files are the optimal positions of the models when they are printed link to creality official original make: https://www.crealitycloud.cn/model-detail/66c6d6618fec9f83c2db4a8d
Battery cover / cap for Yamaha CD player remote controller Print it with supports
The original case for the ramps sits on top of the scalar printer, since i have some issues with the wiring, i prefer to have everything down and with short cables, thus remodeling the case, since the controler has som long wires, putting…
Es bieten sich die vorhandenen Löcher für die Montage von Regal-/Fachböden in den Wänden. Diese haben in der Regel einen Abstand von 32mm (oder vielfaches) und Durchmesser von 3mm, 4mm oder 5mm. Zu Montage gibt es sogenannte Bodenträger.…
this is just the box for pc light controler (esp8266 that controls case lights + power on + audio trigger) see here for pcb, code and instructions : https://github.com/Rayn2k18/pc\_light\_controler Category: Computer
Remote control holder (x4) I was tired of having my remotes spread all over the living room (you know, kids)... I was tired of looking for them all the time (I'm a "one thing, one place" kind of guy)... I was tired of having to get up to…
On/off switch for the main 12VDC cooling ventilator in the lower section of the Rostock max V3 and V3.2 so after a long print job is done the loud ventilator will stop keeping all the sleep needed people awake (only the small cooling…
Mount for the Fosi Audio TB10A/TPA3116 that is compatible with the LEGO Computer Stream Deck Mount (from EMN ) Please note this is a quite tight fit and will require to remove the “non-slipping” pads under the Audio controler. I did put…
Držák pro kontrolér malé domácí elektrárny. Pro přichycení k víku bateriového boxu. Control holder for small home solar charge.
a base for controller of Meta Qest
Replacement goalkeeper controller for foosball.
just use it as you wish anywhere
mini version of the led controler holder
the game holders on the left and right 2 cant hold games dont try it they wil get stuck!
AlzaErgo Arm D35B holder for LED controler
mount for the nacon xbox controller with built in stand for xbox series x
CONTROLER HOLDER MOUNT ( FITS SAMSUNG CONTROLLER AND OTHERS) pretty self explanatory..... supports are built in so it should print as it.... might need a brim. if your printer dosnt bridge well, you can add supports. mount with standard…
it is a tight fit on purpose print in TPU APPLY FRESH OFF PRINTER
2-in-1 Joystick & PS4 Controller Stand Keep your gaming setup clean, organized, and ready for action with this 2-in-1 stand designed to hold a joystick and a PS4 controller . The compact design allows both controllers to be stored in one…
This is Hisense air conditioner remote controler holder for your desk. It fits perfectly, you don't need supports. My remote is ~19mm thick and ~59mm wide (so you can check does your fit, if not you can scale model) Pocket where you…
Having lived with this remote for quite some time, I needed a specific solution: A convenient place to put the remote so I don't search for it all the time. A holder that makes the remote easy to pick up. A holder that makes it possible…
for people who play video games on console, decoration for you
A stand for the controller using the design of the USB dongle as inspiration.
CONTROLER HOLDER MOUNT ( FITS SAMSUNG CONTROLLER AND OTHERS) pretty self explanatory..... supports are built in so it should print as it.... might need a brim. if your printer dosnt bridge well, you can add supports. mount with standard…
