1 / 6
20 x 20 mm extrusion  RAMPS  1.4 + Arduino Mega Controler enclosure — zdjęcie 1
1 / 6

20 x 20 mm extrusion RAMPS 1.4 + Arduino Mega Controler enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Made for a Voron 1.5 3D printer good air circulation and ease of maintenance

Ocena
0 / 5
Polubienia
8
Pobrania
43
Wydruki
0
Wyświetlenia
709
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

This design  was inspired  in the original Voron 1.5 enclosure and in Dasaki 1.4 ramps enclosure (see link)  The aim was to provide good air circulation even with fan fail and a wide open lid for facilitating maintenance. There are several pairs of 3mm holes in the box for anchoring the cables with 2,5mm zip ties.

The enclosure was chopped and splitted in plane panels 

Use M3 bolts and screws for assembly,  and use a piece of 1,75 mm filament as the hinge pin. 

Use M5 screws and T nuts for attaching the box to the aluminium profile.   
 

3D Model Edited in Freecad 0.20  (www.freecadweb.org) the source file is also available for download.

Tagi