1 / 6
20 x 20 mm extrusion  RAMPS  1.4 + Arduino Mega Controler enclosure — image 1
1 / 6

20 x 20 mm extrusion RAMPS 1.4 + Arduino Mega Controler enclosure

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Made for a Voron 1.5 3D printer good air circulation and ease of maintenance

Rating
0 / 5
Likes
8
Downloads
43
Makes
0
Views
709
Reviews
0

Updated at source:

Model information

License
GNU General Public License v3.0

This design  was inspired  in the original Voron 1.5 enclosure and in Dasaki 1.4 ramps enclosure (see link)  The aim was to provide good air circulation even with fan fail and a wide open lid for facilitating maintenance. There are several pairs of 3mm holes in the box for anchoring the cables with 2,5mm zip ties.

The enclosure was chopped and splitted in plane panels 

Use M3 bolts and screws for assembly,  and use a piece of 1,75 mm filament as the hinge pin. 

Use M5 screws and T nuts for attaching the box to the aluminium profile.   
 

3D Model Edited in Freecad 0.20  (www.freecadweb.org) the source file is also available for download.

Tags