1 / 3
Hisense remote controler desk stand desk holder (air conditioner)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Perfect fit, no supports.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is Hisense air conditioner remote controler holder for your desk.
It fits perfectly, you don't need supports.
My remote is ~19mm thick and ~59mm wide (so you can check does your fit, if not you can scale model)
Pocket where you insert remote is 20mm thick and 61mm wide.
Print settings recommendation:
-Infill 15%
-Tops and bottoms 3layers total of 0.6mm.
-Material PETG
-NO SUPPORTS
Mine model got a little bit of warpage on edges, but I don't have heat bed on my printer.