Wyniki wyszukiwania: hisense

Hisense Roku Smart TV Remote Stand

A quick and easy to print stand for my Hisense smart Roku TV's remote that holds it up at 15 degrees off vertical.

Hisense Roku 32" TV Legs

Print on the side with a brim. The legs have a tendency to warp unless you're printing in an enclosure. The original model was modified to fit a smaller TV. There is a second file with tapered holes to accept a larger screw head.

Hisense Google Tv Remote Control Holder

Wall mountable remote holder for a Hisense Google Tv remote

Hisense Pumpenfilter-Ablasshilfe für Waschmaschinen

Das Problem Der Pumpenfilter deiner Hisense Waschmaschine sammelt regelmäßig Flusen, Münzen und Verschmutzungen. Beim Ablassen des Filters läuft das Wasser häufig unkontrolliert über den Boden – eine lästige und zeitaufwändige…

Fire TV Remote Holder/Wall Mount (for Toshiba, Hisense, and Others)

This is a wall mount I designed for my Toshiba Fire TV remote. It has also been verified to work with other Fire TV brands such as Hisense. I designed it to mount using double sided sticky tape since it will be on the side of a cabinet in…

TV stand/feet raiser for Hisense

A 0,79inch (2cm) high raise for hisense tv feet. The Hisense tv feet is shown in the picture and fits nice on the raise. I created the raise because my soundbar is currently to high in front of the tv and blocks the signals from the…

Hisense 32A series TV stand L & R - DRAWING INCLUDED

Simple yet functional replica of Hisense 32A series Stand Unit. !! Check the PDF drawing if dimensions match !! There is a small letter L or R in the same spot as in original feet. Can be printed from any material, but preferably with…

Hisense TV U Channel

I made this U channel for my Hisense TV to hold a piece of plexi glass as a screen protector on the front of the tv. I am using it with my granboard dart board and it hangs above it. So I did not want a dart to hit the screen and break…

Hisense Roku TV riser feet

The Hisense HS214 soundabar doesn't quite fit between below the Hisense 43" Roku TV (why Hisense, why?) so I needed a part to raise it up. protius2 on thingiverse made this television lifting shoe for the same TV but it was too tall for…

HiSense TV Remote Wall Holder

This is a simple wall-mounted holder for HiSense TV remotes. It was designed around the remote supplied with the HiSense A6Q series , but it should fit other HiSense remotes that share the same body shape. The holder gives the remote a…

HISENSE TV Remote Wallmount

A friend wanted to have a wall mount for his Hisense remote. So here it is. You should be fine with only one screw (the top one). Just in Case I made another hole for support if needed.

Hisense Portable AC Reverser/Hose Attachment

Its getting a bit cold, and I would like to shift as much load as possible off of our silly little fossil fuel furnace until I get the chance to throw it into the sun, so, in leiu of just buying things when I dont need them, I decided to…

Hisense 55RG tv stand and My Own designed Plug

Bought a Hisense 55RG came without feet and was going to cost $100 aud to buy some so spent a few hours designing a new plug and adapting the feet from Print mint to fit the model of TV I have. The foot plug is my own design which I made…

Hisense TV Remote Generic wall mount 50mm by 25mm

TV remote hanger for any remote with no buttons at the bottom and the base 50mm by 25mm I did this one with PLA Added another STL with larger front cutout Please add a photo of your print to Makes

Hisense Under TV Mount for JBL Bar 2.1 - Deep Bass Soundbar

Compatibility Note I'm not sure if the same stand mounts are used across the Hisense product lines, or if it is only a small subset of TVs. Other mounts (for another soundbar or different accessory) can be designed to attach to the same…

Hisense TV Leg Adjustment

The footprint of my 50" Hisense TV is 34 inches and I needed it to fit on a narrower cabinet. This adapter moves the legs in approximately 3 inches on each side. I use M5 brass inserts for the original leg to attach to the adapter as it…

Govee DreamView T1 TV Backlight for Hisense Top Mount

Printer: Anycubic Vyper Rafts: No Layer Height: 0.16 Infil: 20% Supports: No Filament: PLA Rotate model so that the top surface is on the build plate. Use thick double sided tape to secure in place.

Hisense Portable AC Swing Door Keyed Pivot Point

Bear with me here. I have a 8500 BTU rated portable air conditioner from Hisense (Lowe's: https://www.lowes.com/pd/Hisense-500-sq-ft-115-Volt-Grey-Portable-Air-Conditioner/1000537611). As is often the case with disposable electronics, the…

ECM - Soundbar Stand - Hisense HS2100

Simple desk or tabletop soundbar stand for Hisense-HS2100 soundbar, this is designed with a slight tilt up . No supports are needed with this model and should take approximately 1.5 hours to print at 0.2 with 20% infill, depending on…

hisense foot riser

foot standoff for hisense tv 3.5in, mirror for other side

Hisense A9 EInk Smartphone

Pretty accurate model of the Hisense A9 E Ink Smartphone. I needed a model to build a case around. Hopefully this helps someone else! p.s. this was modeled with $4 plastic calipers so measurements are “accurate to within an eyeball”.

200mm Hose Adapter for Portable AC (Fits 137x162mm Hisense Port)

This custom-designed adapter allows you to connect a 200mm diameter ventilation hose to portable air conditioners that use the 137mm × 162mm connector , such as the Hisense APH09QC model (and many others with similar exhaust ports). ✔ Key…

Projector Lens Cover for Travel & Storage (Hisense M2 Pro)

Although the Hisense M2 Pro mini projector comes with its own box, I found that the box is often too bulky and inconvenient for everyday transport. Because of that, I designed this flexible TPU lens cover to keep the projector lens…

Levelling foot for Hisense tumble dryer

I made this to replace a few lost levelling feet for my Hisense dryer after finding out they're about €10 a piece, which is more than I am willing to pay for a piece of plastic. I made it for the one I have (DHGA8013L), but while…

Can stopper for fridge shelf - extending for hisense fridge

Given my fridge shelves being only 320mm deep, I can only fit ~4,85 cans. To be able to secure the 5th can, I had to extend the 'stopper' by attaching it to the front edge of the glass shelves in my Hisense fridge (RB400N4EG3) . =>…

Hisense tv stand

tv stand for hisense tv. I have only tested with 34in. version so test with your own tv

Hisense fridge french door latch extender

Sits a bit loose on the latch. It works without it but I recommend a small bit of VHB or similar double sided tape at the rounded end. Fridge Model: HRF266N6CSE

Honeycomb Wall Hisense Remote Holder

I just took a Hisense google tv remote holder and slapped a honeycomb on the back. I did not make this but remixes were not allowed.

Hisense Shelf (HRF266N6CSE1)

I printed this in PVB so I could fuse the 2 pieces together, but I'm pretty sure super glue does the job just fine if you wanted to use PLA or PETG. It's been holding anything I put in there without issue. There is also slightly more…

Hisense A5 Hard Case

English version This is a hard case for the Hisense A5. It can protect your E-ink smartphone from damage. And a 3D model of the Hisenses A5 is also included(Hisense_A5.step & Hisense_A5.f3d). I hope it helps to expand E-ink community by…

Hisense 50" TV Leg Adjustment

The original model worked great, until I bought a HiSense soundbar :o( So this remix is for a Hisense 50" TV Leg Adjustment to allow Hisense Soundbar to fit between them They could do with being 2mm shorter in width so they don't touch…

Hisense Remote Control Holder

Damit die Fernbedienung nicht nur auf dem Tisch rumliegt sondern auch passend beim Fernseher abgelegt werden kann. Die Halterung hat den Vorteil das durch den Winkel die Solarzellen so ausgerichtet sind das sie besser die Batterie laden…

Top Sprayer Arm Bearing - Hisense Dishwasher

Hisense Dishwasher. The top basket sprayer for the utensil rack fell off after it completely wore through the thin plastic ring that held it in place. It is so thin, it looks designed to fail. I could not find this part on offer.…

Hisense soundbar bracket for tv

Hisense Portable AC Drain Pipe Spout

EDIT: I made another leak pipe and have uploaded it here - https://www.printables.com/model/1785979-hisense-portable-ac-drain-pipe-v2-wstopper I just printed in PLA. Seems to work so far. The diameter of the pipe is 15.75mm. I made it a…

Hisense A5 Pro Hardcase + Body

English version This is a hard case for the Hisense A5 Pro. It can protect your E-ink smartphone from damage. And a 3D model of the Hisenses A5 Pro is also included(Hisense_A5_Pro_Body.step). I hope it helps to expand E-ink community by…

Hisense RT33D6AAE Soda Shelf

I noticed that my minifridge had spaces for 3 additional soda shelves, and thought this would be the perfect use of 3D printing. The minifridge is a Hisense RT33D6AAE 3.3 Cu. Ft. Compact Refrigerator. The fit is snug, but not overly so.…

Hisense AC Exhaust Adapater

This adapter attaches to the Hisense AC unit. The dimensions of the connection on the back of the unit are roughly 162mm x 125mm. This adapts to a 6 inch diameter hose. The exhaust gets hot! I tried to print this in PLA(I knew it was a…

Shortened and reversed handle for the HISENSE RB343D4DDE fridge

After I purchased and installed this fridge in my apartament it turned out that the stock handle would either collide with the cupboard next to the fridge or, if mounted the other way, collide with the windowsill, making it impossible to…

Hisense Portable AC Drain Pipe V2 w/Stopper

From the original: I just printed in PLA. Seems to work so far. The diameter of the pipe is 15.75mm. I made it a slip-fit piece, so no glue or tape required! Hisense AC Model# AP0621CR1W I'm sure this can be resized if you need to. Print…

Pino aleta de ar condicionado hisense

Pino aleta de ar condicionado hisense

Hisense Hi Move III vacuum cleaner attachment holder / wall mount

Simple vacuum cleaner hose wall mount. You'll need one ~3mm screw with a wall insert.

Hisense AX700/AX5140Q Satellite Speaker Wall Mount/Shelf

Just needed a way to mount it to the wall, so I had AI make this simple print. A bit bulky, but it's functional. Technically, the screws it was designed for are " #8 wood/drywall screws (or M4/4 mm screws), pan or round head, with a head…

Hisense Dishwasher Replacement Parts

My dishwasher wants to die, I won't let it. We've already had hisense replace a leaking hose and, at the same time, the repairman accidentally replaced the top spray arm when it wasn't even on the warranty request, indicating this is a…

Hisense Portable AC Plastic Bag Hose Mount Casement Window

Nuts and bolts: 3/8 in Machine Screws and Nuts

Simple Foot Cover for Hisense 65U7K

Our tv is wall mounted fairly high and I could see the openings where the feet usually go. I designed these simple covers so my OCD would stop bothering me. M5x8 Screws hold them up (I'm sure the screws that came with the feet would work…

Hisense TV Remote Control Holder Wall Mount

Keep your living space organized and never lose your Hisense TV remote again with this functional, low-profile wall mount. Designed for a precise fit, it securely holds the remote while keeping it easily accessible near your TV, couch, or…

Hisense Washing Machine Hinges

We have a Hisense WTX1302s Washing machine, and both hinges broke, the glass is too heavy and the hinges has bad design I designed more robust hinges, printed out of PETG and still going strong

Hisense PL1SE fan mount

I replaced the fans on my PL1SE with Noctuas. This is a fan mount for 2 additional intake fans. Its for 2 92mm fans. I used the NF-A9 PMW With the NA-FC1 fan controller See my Post here: Hisense PL1SE Noctua-Mod : r/projectors

Hisense 55" TV Leg Adjustment

Added holes for M5 nuts so u dont have to use heat inserts When i installed original brackets they ended up at angle so i extended them out 10mm and now they stay flat Deeper hole to screw bracket to TV with stock Hisense M5 screws U will…

Hisense mini refrigerator door tray

Printed in PETG no supports used. It took about 3.5 hrs. Due to size, must be printed on XL or equivalent. Used the canvas option in Fusion 360 to get the general pattern (sktechpad.)

Hisense Canvas TV Mantle Mounts/Holders

DISCLAIMER: TV is not secured to the wall. We are not responsible for any damage or injury if your TV falls. This includes 2 files that you will use to create 3 mounting brackets designed to hold your Hisense Canvas TV in place without…

Remote Caddy - Hisense

A quick and simple vertical holder for the Hisense 4K TV remote (Officially known as the ERF6A80) . It even has drain holes on the bottom so your fallen snacks won't get stuck! MOUNTING: The screw holes were made to fit two #4x1/2in wood…

JBL 3.1 soundbar mount for Hisense SmartTV 4K FFM

I hung our TV on the wall and wanted to lift the soundbar off the console as well. I designed mounts which fit into and screwed into the attachment points for the legs, using the same screws. The mounts extend down enough so that there is…

Hisense remote controler desk stand desk holder (air conditioner)

This is Hisense air conditioner remote controler holder for your desk. It fits perfectly, you don't need supports. My remote is ~19mm thick and ~59mm wide (so you can check does your fit, if not you can scale model) Pocket where you…

Hisense 5140Q 5.1.4 Rear Surround Sound Angled Mount

Hisense 5140Q 5.1.4 Rear Surround Sound Rotated Mount with 30 and 40 degree angled mounts using stock hardware. If replacing the stock mounts, this will lower your speaker by 10mm. I had to separate the wall mount screw and speaker mount…

Hisense TV Leg Adjustment

The footprint of my 50" Hisense TV is 34 inches and I needed it to fit on a narrower cabinet. This adapter moves the legs in approximately 3 inches on each side. I use M5 brass inserts for the original leg to attach to the adapter as it…

Hisense soundbar bracket for tv

Hisense Pumpenfilter-Ablasshilfe für Waschmaschinen

Das Problem Der Pumpenfilter deiner Hisense Waschmaschine sammelt regelmäßig Flusen, Münzen und Verschmutzungen. Beim Ablassen des Filters läuft das Wasser häufig unkontrolliert über den Boden – eine lästige und zeitaufwändige…

Hisense tv stand

tv stand for hisense tv. I have only tested with 34in. version so test with your own tv

Hisense Roku 32" TV Legs

Print on the side with a brim. The legs have a tendency to warp unless you're printing in an enclosure. The original model was modified to fit a smaller TV. There is a second file with tapered holes to accept a larger screw head.