1 / 3
Grindfinity Desolder Pump with accesories
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
4x1 Desolder Pump holder with a holder for rosin flux and desolder wick
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 92
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Made a 4x1 Desolder Pump holder with a holder for rosin flux and desolder wick
Made the step and fusion file available if u want to change the diameters and such in the timeline
Print like any other gridfinity file i made it in 0.3mm as i find that enough for out of the sight organizers
The gridfinity project was released by Zack Freedman. - Kudos to Zack
Check out the gridfinity homepage and watch Zacks youtube video of gridfinity:
Gridfinity Tips!
- No brims or support required!
- Use any filament with an 0.6mm or smaller nozzle.
- Wider bins can curl, so maximize your bed adhesion if you're going big!
- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners.