Grindfinity Desolder Pump with accesories
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.71 – €3.31 net (excluding VAT)
For file: Desolder_0.3mm_PLA_MK3S_2h17m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.01 excluding VAT (range midpoint).
- Weight reported by the author
- 53 g
- Print time reported by the author
- 2.28 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
4x1 Desolder Pump holder with a holder for rosin flux and desolder wick
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 92
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Made a 4x1 Desolder Pump holder with a holder for rosin flux and desolder wick
Made the step and fusion file available if u want to change the diameters and such in the timeline
Print like any other gridfinity file i made it in 0.3mm as i find that enough for out of the sight organizers
The gridfinity project was released by Zack Freedman. - Kudos to Zack
Check out the gridfinity homepage and watch Zacks youtube video of gridfinity:
Gridfinity Tips!
- No brims or support required!
- Use any filament with an 0.6mm or smaller nozzle.
- Wider bins can curl, so maximize your bed adhesion if you're going big!
- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners.