Ender 5 Max "Scythe" Toolhead Shroud

Comes with two hotend adapters - one for BL style hotends, and one for clone Creality K1 Hotends. Also works with the stock hotend. The adapters will not work with the stock shroud or the other two common shroud replacements - I played with that idea as well, placing the fan on the side like the stock hotend puts the fan too low and cause it to collide with the cooling ducts of those shrouds.

Also comes with a cutout to support the K1 Extruder swap - which requires dremel work of an internal metal structure as well. No directions will be provided for this, only the mention that it is possible as an almost bolt on swap.

This shroud was designed around a slightly weird heat insert size - M3 x 4.2mm OD x 4mm Length for the front fan, M2.5 x 3.5mm OD x 4mm Length for the side 4010s. Will need 4 M3 heat inserts and at least 4 M2.5 inserts. Not my first choice, but this is what was on hand for the person the shroud was designed for, so I went with that for their convenience.

Easiest way to print this is going to be laying flat on the front face. It was designed with that in mind, minimal supports will be needed for the ducts on the side and I believe the internal geometry will print with no supports at all. 

External design was partly requested by, and partly inspired by, the man the shroud was originally designed for - Shad0wyDr3ams on discord. I am also including .stl files for a plain, flat outer shell - no screenshots will be provided, but you can view these in the 3D Model Viewer.

.step files are included for the main shroud variants, the BL hotend adapter, and the K1 Clone hotend adapter.

Recommended to print the hotend adapters in ABS/ASA or better. Shroud will probably be ok in PETG, but ABS/ASA is also recommended for that due to strength and stiffness.