Chamber Air Filtration, 7530fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Active air filtration system for printer chamber
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 251
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Another variant of the chamber air filtration. Bento box was too bulky and Bento Mini uses not available to me 6028 fan. So I took inspiration from Mini and designed from the ground up a system that uses 7530 fan and has way less parts to print.
Not technically a remix, but HEAVILY INSPIRED
You will only need to print Bottom, Cover and attachment piece if you need it.
For attaching cover to the box you will need 6 M3 heat inserts of your choice (the holes are 4mm, so any insert will fit. I recommend using Voron design specification for the heat inserts) and 6 M3*8mm screws.
Assebmly is straightforward - print the Bottom and the cover, put activated carbon granules into the compartment, secure with M3 bolts. That's it.
Oh, I forgot, you'll need to open your 7530 fan, take off top part, and cut the bottom part so it will fit into the printed box.