Metabo TS 254M - Better Fence Lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Addon to the original fence lock to make sure that it locks the fence in 90 degree and stays 90 degree's during the cut.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 145
- Wydruki
- 0
- Wyświetlenia
- 666
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
The Metabo TS 254M is a really good budget table saw, when ignoring the wobbly fence which requires alot of time to get to lock at 90 degree's relative to the saw blade.
So I designed a new wider fence lock that is mounted as an addon to the existing one.
It also has a wall that looks the fence walls wobble in the horizontal direction.
This print has saved me a lot of time adjusting the fence to get a straight cut, and i can finally trust the first measurement I do before cutting.
Parts
The print consists of 3 parts.
- TS254M - Fence Lock
- TPU - TS254M - Right Fence Grip Seal
- TPU - TS254M - Left Fence Grip Seal
The grip seals are glued to the Fence Lock
Filament
- Fence Lock
I recommend using a rigid filament type. I printed it using PETG-CF, which seems to work fine. But the stiffer the better.
- Fence Grip Seal
Print in the most grippy TPU you have
Print Settings
Fence Lock
- Layer height 0.2mm
- 5 Walls (Perimeters)
- 1.2mm top and bottom layer
- Gyroid or Cubic infill I recommend 25-35%
- Recommend adding a modifier with 8 walls around the bolt hole.
Fence Grip Seal
- Layer height 0.2mm
- 2 Walls (Perimeters)
- 0.4mm top and bottom layer
- Gyroid infill 30%