1 / 6
Metabo TS 254M - Better Fence Lock — image 1
1 / 6

Metabo TS 254M - Better Fence Lock

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Addon to the original fence lock to make sure that it locks the fence in 90 degree and stays 90 degree's during the cut.

Rating
5 / 5
Likes
10
Downloads
145
Makes
0
Views
666
Reviews
1

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

The Metabo TS 254M is a really good budget table saw,  when ignoring the wobbly fence which requires alot of time to get to lock at 90 degree's relative to the saw blade.

So I designed a new wider fence lock that is mounted as an addon to the existing one.
It also has a wall that looks the fence walls wobble in the horizontal direction.

This print has saved me a lot of time adjusting the fence to get a straight cut, and i can finally trust the first measurement I do before cutting.

Parts

The print consists of 3 parts.

  1. TS254M  - Fence Lock
  2. TPU - TS254M - Right Fence Grip Seal
  3. TPU - TS254M  - Left Fence Grip Seal

The grip seals are glued to the Fence Lock

Filament

  1. Fence Lock
         I recommend using a rigid filament type. I printed it using PETG-CF, which seems to         work fine. But the stiffer the better.
     
  2. Fence Grip Seal
         Print in the most grippy TPU you have

Print Settings

     Fence Lock
  1. Layer height 0.2mm
  2. 5 Walls (Perimeters)
  3. 1.2mm top and bottom layer
  4. Gyroid or Cubic infill I recommend 25-35%
  5. Recommend adding a modifier with 8 walls around the bolt hole.
     Fence Grip Seal
  1. Layer height 0.2mm
  2. 2 Walls (Perimeters)
  3. 0.4mm top and bottom layer
  4. Gyroid infill 30%

Tags