Nintendo Power-Up Band
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mock of Nintendo Power-Up bands w/ 3-D relief top design. - prints single color, needs supports.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 205
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Costume Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Design
Designed as party favors to be slid over standard slap bracelets to act as mock Super Nintendo World Power-Up bands.
Alternate use: Works great as a stamp due to the 3-D design - Note: mirror the Luigi one if using as a stamp! :)
Scale
The model files (.stl) are sized to match actual Nintendo Power-up Band dimensions. Prints in photos were sized down to 35mm diameter (x,y) and 10 mm thickness (z) to properly fit slap bracelets and child wrist size - (approx. scaled to 80% x,y and 60% z).
Needs supports for best results. Tested both standard organic and rectilinear on M5: rectilinear printed faster and was just as easy to remove, results similar. Likely needs a quick sanding to avoid sharp edges on wrist.
Designed to print in single color filament - .blend file attached if anyone wants to modify for multi-color print. Looks amazing with light gold silky PLA!
