Nintendo Power-Up Band
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mock of Nintendo Power-Up bands w/ 3-D relief top design. - prints single color, needs supports.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 22
- Makes
- 0
- Views
- 205
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Costume Accessories
- License
- Creative Commons — Attribution — Noncommercial
Design
Designed as party favors to be slid over standard slap bracelets to act as mock Super Nintendo World Power-Up bands.
Alternate use: Works great as a stamp due to the 3-D design - Note: mirror the Luigi one if using as a stamp! :)
Scale
The model files (.stl) are sized to match actual Nintendo Power-up Band dimensions. Prints in photos were sized down to 35mm diameter (x,y) and 10 mm thickness (z) to properly fit slap bracelets and child wrist size - (approx. scaled to 80% x,y and 60% z).
Needs supports for best results. Tested both standard organic and rectilinear on M5: rectilinear printed faster and was just as easy to remove, results similar. Likely needs a quick sanding to avoid sharp edges on wrist.
Designed to print in single color filament - .blend file attached if anyone wants to modify for multi-color print. Looks amazing with light gold silky PLA!
