1 / 13
MMU3 KIT: Injection Molded Spool Holder Wheel Upgrade
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Skateboard bearings and printers are not all created equal. With this remix, you build long lasting replacement wheels
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 156
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
The most important thing you should do:
- Is print ONE of the bearing caps. Test it on your bearing, if its too big, scale it down. 0.1 makes a HUGE difference, I recommend scaling between 0.02 - 0.04, once you get it right, use the 20 piece 3mf, and scale accordingly.
- Then print 40 hubs.
- I used PETG for everything.
- also turned on random seam position
- use supports on build plate only, keep them tight, and they pop off at the end
For bearings use a 608-ZZ or 608-2RS
I use clear so I can see inside, and I can even mark the center line of the wheel. Filament does a good job staying centered.