1 / 13
MMU3 KIT: Injection Molded Spool Holder Wheel Upgrade
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Skateboard bearings and printers are not all created equal. With this remix, you build long lasting replacement wheels
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 156
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
The most important thing you should do:
- Is print ONE of the bearing caps. Test it on your bearing, if its too big, scale it down. 0.1 makes a HUGE difference, I recommend scaling between 0.02 - 0.04, once you get it right, use the 20 piece 3mf, and scale accordingly.
- Then print 40 hubs.
- I used PETG for everything.
- also turned on random seam position
- use supports on build plate only, keep them tight, and they pop off at the end
For bearings use a 608-ZZ or 608-2RS
I use clear so I can see inside, and I can even mark the center line of the wheel. Filament does a good job staying centered.