Parkside PAB-18 1.5 A1 Adapter (to Einhell PXC 18V)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parkside PAB-18 1.5 A1 Adapter (to Einhell Power-X-Change 18V)
- Ocena
- 0 / 5
- Polubienia
- 56
- Pobrania
- 675
- Wydruki
- 0
- Wyświetlenia
- 6275
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Machine-battery adapter for a machine that originally uses a Parkside PAB-18 1.5 A1 battery. This adapter enables to mount Einhell Power X-Change batteries to the Parkside machines.
Extra stuff you need:
- some wiring and a soldering station
- male and female connectors (e.g. https://www.aliexpress.com/item/4000506571122.html and https://www.aliexpress.com/item/4000104101344.html )
- some glue to glue the contacts into the adapter
- some screws to fit the two parts together (I used M4)
- a spring, e.g. from a ball pen
The Einhell mount is a remix of https://www.thingiverse.com/thing:2830821 , fixing some dimensions & sharp edges and adapted it to fit well with the Parkside one.
Notes
These parts need minimal supports if placed upright (except for the clip).
Things were designed to the point. So if your printer isn't as accurate as mine, these things might not fit as they'll be too tight.
Print with more infill if you regularly remove the adapter(s) from the machine.
Post-Printing
If the parts are too tight for your machine/battery use a little file for post-processing or scale the part a little bigger.
Cut out the printed supports with a sharp knife.
The screw holes of the Parkside adapter are made for a tap and die, but might also be used to directly hold the screws.