Bosch Rotak 34 Replacement Part 801/1/17 Belt Drive Pulley
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom-designed replacement for part 801/1/17 of the Bosch Rotak 34 lawnmower (3600H82000). Tested and working reliably
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Replacement Part for Bosch Rotak 34 (Part 801/1/17)
About 2 years ago, our Bosch Rotak 34 (model number 3600H82000) lawnmower broke down. The issue was with part 801/1/17, which unfortunately was no longer available as a spare. I didn’t want to throw the whole mower away, so I decided to design a replacement part myself.
While this version looks different from the original, it has been working flawlessly for over two years now. It gets the job done!
Please note: Transferring the bearings and the shaft from the old part can be a bit tricky. You’ll need a large vise and some tubing to do it properly — but it’s definitely doable.
Important: I wasn’t able to take good pictures of the part installed, as it sits deep inside the mower and is hard to access once assembled. However, I’ve tested it thoroughly, and it performs just as needed.
Printing tips:
Material: PETG
Infill: Around 60%
Supports: Required