1 / 4
19" Rackmount bracket for MikroTik hAP ax2
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bracket for mounting a MikroTik hAP ax2 router inside a 19" rack
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 133
- Wydruki
- 0
- Wyświetlenia
- 1108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (18)Powiązane
This is a bracket for mounting a MikroTik hAP ax2 router inside a 19" rack. It utilizes the stand included with the router for providing solid mounting by screwing it to the bracket.
Note: This is a router. Putting it in an enclosed metal box or between two metal plates will negatively impact its capability for wireless communication.
Parts required:
- 2x M3x8 countersunk screws. I only had M3x16 lying around so I used a saw to shorten two of them.
- 2x M3x6x5 threaded inserts. Alternatively you can use M3 nuts which you tighten from the bottom but by using threaded inserts you get a flush fit.
- 2x M6 bolts and cage nuts for mounting the bracket to the rack
- The router and its included stand
- A 3D printer and filament (duh)
Assembly:
- Use a soldering iron to push the threaded inserts into the holes on the mounting plate from the top.
- Screw on the mounting bracket
- Mount the router
- Mount the router to the rack