1 / 5
Mandalorian (Din Djarin) Helmet KOA (XDA-ish) Profile Keyboard Keycap
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mandalorian Helmet KOA Profile Keycap for the escape key printed in two colors no-AMS. For CherryMX cross switch stem.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 177
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mandalorian (Star Wars) Helmet KOA Profile Keycap for the escape key printed in two colors no-AMS. Printed with a pause at layer filament change. For CherryMX cross switch stem. Turns out quite nice for a 0.4 nozzle. Not too much taller than the actual keycaps, so it is very usable.
Slicing advice:
- 0.1mm layer height or less.
- 0.4 line width for all line width settings.
- Arachne slicing option.
- Turn on “Avoid Crossing Walls”.
- Turn on “Make Overhangs Printable” if the bottom of the helmet is having trouble. (I provided the .3mf file with the required settings).
- Turn down the speeds to slower than usual. Will depend on your printer.