X-Shot Micro 2.0 Reshell 1 v1.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a shell with a better form factor for the X-Shot Micro 2.0, the newest tiny blaster variant from X-Shot/Zuru.
- Ocena
- 5 / 5
- Polubienia
- 79
- Pobrania
- 299
- Wydruki
- 12
- Wyświetlenia
- 2795
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a reshell for the X-Shot Micro 2.0, the newest tiny blaster variant from X-Shot/Zuru. All the hardware you need is already provided by the Micro. You just need to print parts in the colors of your chosing and you're good to go to take a screwdriver to the blaster.
This is the first entry in the second line of Micro reshells, now focused on the Micro 2.0. (Since that's the one Zuru is now making, instead of the other one. Welp.)
Printing
Everything fits on a bed of 180mm edge length. I tend to print with 4 walls and 15% cubic infill.
The assembly instructions can be found here -> https://wildwestscifi.net/x-shot-micro-2-0-reshell-1-assembly-instructions
There's more complex reshells available, too~ → https://www.printables.com/search/store?q=Micro+reshell
Changelog:
v1.0 - Initial Release