Eero 2nd gen (cupcake) Ikea Hauga bookshelf wall mount bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A slip-on wall mount bracket for the Eero Gen 2 cupcake pod. It slides around the side of the case and over a shelf.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print with supports for the shelf slot, and in something that can take a bit of flex. The wall-side clamp is preloaded a bit to clamp well. The shelf slot is a close fit, but shouldn't stretch, as it would separate the layer lines.
Due to the addition of the C clamp arm, the print orientation is not the same as the original, which results in a worse quality surface. v2 changes out the smooth large radius for a chamfer with a smaller radius on the lower edge, as well as fills in the corner to help with bed adhesion on the skinny leg.
