Window Frame Mod. Stops belts rubbing on panels. With optional Double Glaze for Voron 2.4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Increases Clearance, Cleaner look, easier install. PLUS save energy and get higher chamber temps, with Double Glazing.
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 66
- Wydruki
- 1
- Wyświetlenia
- 857
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Stops your belts and cable chains from scratching your side panel by increasing clearance.
Simplifies the removal and installation of the panels. just remove the top frames (you need to loosen the topmost screws of the side frames) and the panels can slide in or out.
Double glaze you Voron2.4 for better insulation. Saving you energy and giving you higher chamber temps.
Slots are designed to fit 3mm acrylic with 1mm foam tape. Face the tape outwards for easier installation. rear frame has thicker slots, does not include double glaze for the rear panel.
Requires m3x12 screws, m3x10mm will work too but is not ideal.
Print with the slots facing up.
Included single glaze and double glaze version for your convenience.
Now includes Double Glaze Clicky Clacky mod. You need to get the hardware for the original Clicky Clacky.
Specifically, hinge pins, hinge bushings, rubber gasket, and magnets.
Ps I may have to upload the door mod as a remix of the original clicky clacky, let me know what you guys think