1 / 7
Wallmount for Battery Charger of E-Bikes from Focus Jam2 / Jam2 HT / Bold2 / Sam2 with Shimano E8000 — zdjęcie 1
1 / 7

Wallmount for Battery Charger of E-Bikes from Focus Jam2 / Jam2 HT / Bold2 / Sam2 with Shimano E8000

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Wandhalterung für Shimano E8000 Ladegerät der E-Bikes Focus Jam2 / Jam2 HT / Bold2 / Sam2 378Wh Akkus oder T.E.C Pack

Ocena
0 / 5
Polubienia
2
Pobrania
35
Wydruki
0
Wyświetlenia
180
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Wallmount for Battery Charger of E-Bikes from Focus Jam2 / Jam2 HT / Bold2 / Sam2 with Shimano E8000 motor, using a 378wh internal or 378wh T.E.C. Pack Battery. 

Mountable with two screws to a wall or, using the holes on the backside with screws (Phillips Rounded Head Thread-Forming Screws for Plastic, 18-8 Stainless Steel, M4 Screw Size, 8 mm Long), at a pegboard with a 45mm keyhole matrix. 

There is also an integrated cable organiser on the right and left side.

Easy printable without supports using PLA or PETG.

Printing instructions:

  • 0.4 nozzle
  • 0.2mm Speed
  • no supports needed
  • 10% infill

Pegboard mounting screw matrix (use at least 3 screws):

Tagi