1 / 9
Dell Micro 1U Rack Mount Reloaded
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dell Micro 1U Rack Mount Reloaded
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 102
- Wydruki
- 0
- Wyświetlenia
- 1396
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (17)Powiązane
I print this in PLA (all I had for now) but this is NOT strong enough.
I added a 10cm yellow box as support for the back (it already brakes due to the weight of the 2 dell 3060 PCs; and without the power supplies!).
For the M4 screws and nuts; I didn't know exactly how it was fixed on the original models. I choose to heat the nut (10-12 seconds) and melt the PLA to insert the nut. The M4 screws I bought were 800 mm long; I cut them (-12mm) so they perfectly fit the required length.