1 / 9
Dell Micro 1U Rack Mount Reloaded
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dell Micro 1U Rack Mount Reloaded
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 102
- Makes
- 0
- Views
- 1,396
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
I print this in PLA (all I had for now) but this is NOT strong enough.
I added a 10cm yellow box as support for the back (it already brakes due to the weight of the 2 dell 3060 PCs; and without the power supplies!).
For the M4 screws and nuts; I didn't know exactly how it was fixed on the original models. I choose to heat the nut (10-12 seconds) and melt the PLA to insert the nut. The M4 screws I bought were 800 mm long; I cut them (-12mm) so they perfectly fit the required length.