In A Meeting sign for door - with holes for magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
In A Meeting sign. There are indentations for gluing magnets (1mm x 10mm round) in the back. I printed with 2 colours.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 202
- Wydruki
- 1
- Wyświetlenia
- 1475
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution
I needed a sign to let others know when I was in a meeting. I made this in Tinkercad and added indentations to glue 1mm X 10mm magnets. This allows me to easily stick it to my metal door. I printed the pictured one with white and black PETG, but works with any colour and prints nicely with PLA.
I used a 0.4mm nozzle, 0.2mm lay height, 2 perimeters, and a colour change at 2.2mm. Printed with 15% infill, rectilinear (use whatever your favourite pattern is). Took a little under 2 hours including filament change.