FirmGrip Towel Holder - Eccentric Clamp, No Springs, 100% 3D Printed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
No more falling hand towels! This 3D-printed clamp towel holder securely grips your hand towel while drying your hands!
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 312
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Tired of hand towels constantly slipping off hooks or cluttering your countertops? The FirmGrip Eccentric Clamp Towel Holder is here to provide a robust, reliable, and surprisingly simple solution – and it's 100% 3D printed! No hidden springs, no screws, just pure mechanical ingenuity. This design consists of a few parts that are easy to assemble, giving you precise control over securing your towels.
How it Works: The Magic of the Eccentric Lever Mechanism
The secret to the FirmGrip's strength lies in its clever eccentric lever mechanism. Inspired by the powerful and reliable clamping action found in traditional wood clamping tools, this design uses a precisely shaped lever. You manually actuate the lever to rotate the eccentrically pivoted element. This rotation creates increasing pressure, securely locking the towel against a fixed surface. To release, you simply operate the lever again. The best part? No eyelets or holes are needed in your towels! This mechanism provides a surprisingly strong and dependable hold without damaging your linens.
Key Features:
- Powerful & Reliable Grip: The user-operated eccentric lever mechanism ensures your towels stay exactly where you clamp them.
- 100% 3D Printed: If you have a 3D printer and filament, you have everything you need!
- Easy Assembly: Composed of a few distinct parts that snap or fit together intuitively and quickly.
- Towel-Friendly: Securely holds towels without requiring any holes, loops, or modifications to them.
- Durable & Robust Design: Built with mechanical simplicity in mind for a long-lasting and sturdy holder.
- Precise Manual Operation: You control the clamping and unclamping action with the lever for a deliberate and secure hold.
- Designed for an easy, support-free printing experience (if applicable to your design).
- Mounting: Can be attached to walls or cabinets using foam-based double-sided adhesive tape.
Recommended Print Settings:
- Material: PLA is perfectly sufficient for this design and will yield great results. Of course, other materials like PETG can also be used if preferred.
- Layer Height: 0.2mm (or your preferred setting for functional prints).
- Infill: 20-30% (consider slightly higher for the lever part for added strength).
- Wall Lines/Perimeters: 3-4 walls are generally sufficient.
- Supports: None.
- IMPORTANT NOTE ON CLEARANCES: Your printer should be capable of cleanly printing fits with approximately 0.3mm clearance. This is important for the parts to assemble correctly and for the eccentric lever mechanism to function smoothly. It's advisable to check your printer's tolerances if you're unsure.
- Orientation: Print parts in their uploaded orientation for optimal strength.
How to Use:
- To Clamp: Place an edge or corner of your towel into the opening of the FirmGrip holder. Then, manually rotate the eccentric lever into its closed/clamping position. This will firmly secure the towel.
- To Release: Simply manually rotate the eccentric lever back to its open position. The towel can now be easily removed.
Enjoy your new, super-functional FirmGrip Towel Holder! I designed this to be a practical and reliable addition to any kitchen or bathroom, giving you direct control over its strong clamping power.
I'd love to see your makes! Please share photos of your prints and how you're using them. If you have any questions, suggestions, or feedback, feel free to leave a comment below. Happy printing!