CNCkitchen Heat Insert Tips for Weller-LT Gridfinity 1x1 bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity Bin 1x1 21mm fits Heat Insert M2-M8 Tips compatible with Weller LT Series soldering iron.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 151
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a gridfinity organizer for the M2-M8 heat insert tips from CNCKitchen for Weller LT soldering irons. It is not stackable when filled.
I tried the linked model by Dan and had some issues, that I adjusted:
M4 and M5 didn't fit at all - had to bore them out with 7mm and 7.5mm drill bit.
M6 and M8 were a bit too loose for my liking.
With my measured Diameter + 0.5mm I adjusted the diameter of the holes.
To make them more equal in height I also adjusted the depth - mainly for M2 and M3.
The adapter for the soldering iron (Weller LT) is shorter, but fits into the designated spot - so I left it as is.
Here are my measurements and adjustments:
| Dimensions | measured outer-⌀ [mm] | old size hole ⌀ [mm] | new size hole ⌀ [mm] |
| M2 | 6,4 | 6,8 | 6,9 |
| M3 | 6,4 | 6,8 | 6,9 |
| M4 | 6,8 | 6,8 | 7,3 |
| M5 | 7,3 | 6,8 | 7,8 |
| M6 | 7,7 | 8,3 | 8,2 |
| M8 | 9,2 | 9,8 | 9,7 |
| Dimensions | measured length [mm] | old depth hole [mm] | new depth hole [mm] |
| M2 | 21,1 | 5 | 8 |
| M3 | 21,1 | 5 | 8 |
| M4 | 14,0 | 4 | 4 |
| M5 | 15,6 | 4 | 5 |
| M6 | 16,4 | 4 | 5,8 |
| M8 | 16,6 | 4 | 5,8 |
Here is the link to the exact store and set I bought:
https://cnckitchen.store/products/soldering-tips-set-compatible-with-weller-lt