CNCkitchen Heat Insert Tips for Weller-LT Gridfinity 1x1 bin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gridfinity Bin 1x1 21mm fits Heat Insert M2-M8 Tips compatible with Weller LT Series soldering iron.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 25
- Makes
- 0
- Views
- 151
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a gridfinity organizer for the M2-M8 heat insert tips from CNCKitchen for Weller LT soldering irons. It is not stackable when filled.
I tried the linked model by Dan and had some issues, that I adjusted:
M4 and M5 didn't fit at all - had to bore them out with 7mm and 7.5mm drill bit.
M6 and M8 were a bit too loose for my liking.
With my measured Diameter + 0.5mm I adjusted the diameter of the holes.
To make them more equal in height I also adjusted the depth - mainly for M2 and M3.
The adapter for the soldering iron (Weller LT) is shorter, but fits into the designated spot - so I left it as is.
Here are my measurements and adjustments:
| Dimensions | measured outer-⌀ [mm] | old size hole ⌀ [mm] | new size hole ⌀ [mm] |
| M2 | 6,4 | 6,8 | 6,9 |
| M3 | 6,4 | 6,8 | 6,9 |
| M4 | 6,8 | 6,8 | 7,3 |
| M5 | 7,3 | 6,8 | 7,8 |
| M6 | 7,7 | 8,3 | 8,2 |
| M8 | 9,2 | 9,8 | 9,7 |
| Dimensions | measured length [mm] | old depth hole [mm] | new depth hole [mm] |
| M2 | 21,1 | 5 | 8 |
| M3 | 21,1 | 5 | 8 |
| M4 | 14,0 | 4 | 4 |
| M5 | 15,6 | 4 | 5 |
| M6 | 16,4 | 4 | 5,8 |
| M8 | 16,6 | 4 | 5,8 |
Here is the link to the exact store and set I bought:
https://cnckitchen.store/products/soldering-tips-set-compatible-with-weller-lt