Riser for MK Prusa Printers to print on fabric
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You need a steady surface to print on fabric. This raises print surface while securing bed and steel sheet.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 177
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Widened the bed surface to add stability. Also added lips to secure both the heatbed and steel plates by fitting the riser to precisely fit the bed and plate.
Added 20mm holes for round magnets. Still have option of using bar magnets.
Recommend using clips (medium) on the ends and small on the sides to keep material stretched taunt.
Supports are recommended but remove easily.
Recommend gluing the end onto the main print. May not need but offers more secure fit.
Follow the instructions: https://blog.prusaprinters.org/how-to-print-on-t-shirts_55588/
No need to have heatbed on! Therefore, you should be able to print with PLA or PETG without any problems.