Riser for MK Prusa Printers to print on fabric
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€7.28 – €8.90 net (excluding VAT)
For file: MK Riser with end_0.4n_0.25mm_PETG_MK4S_6h52m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €8.09 excluding VAT (range midpoint).
- Weight reported by the author
- 136 g
- Print time reported by the author
- 6.86 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
You need a steady surface to print on fabric. This raises print surface while securing bed and steel sheet.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 11
- Makes
- 0
- Views
- 178
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Widened the bed surface to add stability. Also added lips to secure both the heatbed and steel plates by fitting the riser to precisely fit the bed and plate.
Added 20mm holes for round magnets. Still have option of using bar magnets.
Recommend using clips (medium) on the ends and small on the sides to keep material stretched taunt.
Supports are recommended but remove easily.
Recommend gluing the end onto the main print. May not need but offers more secure fit.
Follow the instructions: https://blog.prusaprinters.org/how-to-print-on-t-shirts_55588/
No need to have heatbed on! Therefore, you should be able to print with PLA or PETG without any problems.