Dewalt/Craftsman TSTAK FatMax Versastack - organiser "side bins"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces each of the long side bins with 3x bins. Making better use of the available depth. Use both sides or just one.
- Ocena
- 2 / 5
- Polubienia
- 56
- Pobrania
- 221
- Wydruki
- 1
- Wyświetlenia
- 1469
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update April-26: Thanks to @WK_0bjkt_4142451 for highlighting that some of the newer boxes have additional tabs that prevent these holders from working. Please see his comments for details.
v2 update: Improvements to have a tighter fit to the sides of the box, better alignment of the three boxes and removed potential for the rear most bin to catch the box lid.
I never found much use for the two long side bins at the edges of the DeWalt TSTAK Organiser (DWST83497) and elected to change these into 3 bins each. The end bins benefit with additional depth due to the ‘hidden’ storage under the standard long bin.
The bins match the size of the originals, allowing them to interface with the clear lid correctly. Bins at each end are held in place using the guide as per the original, with the centre bin supported by two half-moon shapes from the end bins.
Difficult to see the details on a black bin in a black case, hence the use of white in the photos.
If you've found this model useful, please consider buying me a Ko-Fi coffee.
Enjoy.