1 / 3
VESA mount for KCEVE KVM
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
It's a bracket for KCEVE KC-KVM401A KVM switch for mounting it on VESA plate.
On photos it's combined with https://www.thingiverse.com/thing:1935823 pole bracket but also can be used with any VESA 75-100 plate.
STL should be printed two times, one stright and one mirrored. Besides that you'll also need
- 4 or 6 M5x10 or M5x12 countersunk screws to mount it on pole bracket as I did.
or - 4 M4x12 countersunk screws with 4 nuts and 4 washers to mount it on standard VESA plate
Mounting holes prints better with supports but it's not really a requirement.