1 / 3
VESA mount for KCEVE KVM
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bracket for KCEVE KC-KVM401A KVM switch.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 82
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
It's a bracket for KCEVE KC-KVM401A KVM switch for mounting it on VESA plate.
On photos it's combined with https://www.thingiverse.com/thing:1935823 pole bracket but also can be used with any VESA 75-100 plate.
STL should be printed two times, one stright and one mirrored. Besides that you'll also need
- 4 or 6 M5x10 or M5x12 countersunk screws to mount it on pole bracket as I did.
or - 4 M4x12 countersunk screws with 4 nuts and 4 washers to mount it on standard VESA plate
Mounting holes prints better with supports but it's not really a requirement.