K1/K1C ROIDMI HEPA filter adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another HEPA filter adapter for the K1 optimized for a tight fit with the ROIDMI HEPA filter
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
When printing the model by AmorProximi, i noticed that the ROIDMI filter I received from Amazon (ASIN: B08V99WW32) didn't fit tightly all the way around. I remodeled the part in Fusion to get a tight seal, and also added in the chamfer and tabs from the stock filter holder. The part was printed with Bambu PETG HF for ABS prints.
The part was printed with:
- 3 walls
- 10% gyroid infill
- automatic brim
I definitely recommend printing with a brim. After adding this, I would recommend running the chamber fan at 100% during every print to keep negative pressure inside the enclosure. I have noticed that the fan does not push a lot of air with the filter properly fitted.